How Toremove Andinstall Thepullout Drawer - Sears KENMORE ELITE 596.72282200 Manual De Uso

Installing Your Refrigerator
How to Remove and Install the Pullout Drawer
WARNING
To avoid electrical shock which can cause severe personal injury or death, disconnect power to refrigerator before
removing doors. After replacing doors, connect power.
CAUTION
To avoid possible injury, product, or property damage, you will need two people to perform the following instructions.
Removing Pullout Drawer
full extension. Remove
Phillips screw from
each Side of rail
system.
Installing Pullout Drawer
m
Pull upper basket out
to full extension, and
lift out to remove.
"_ With drawer pulled out to I\
_full extension, insert lower __
basket by aligning tabs on
both side of lower basket
,,_ ,"_
with notches in raa assembly. F
I4 lide upper basket into ___[___
unit. Make sure that
rear of basket hooks l___/]
behind rail catch. __J7