Descargar Imprimir esta página

Connecting A Dvd Player/Set-Top Boxvia Dvi; Connecting A Dig - Samsung LN-T1953H Instrucciones Del Propietario

Ocultar thumbs Ver también para LN-T1953H:

Publicidad

Idiomas disponibles

Idiomas disponibles

Connecting a DVD Player/Set-Top Box via DVl
This connection can only be made if there is a DVI Output connector on the external device.
1.
Connect a DVI to HDMI
Cable or DVI-HDMI Adapter
between the HDMI/DVI IN
connector on the TV and the
DVI connector on the
DVD player/Set-Top Box.
2.
Connect Audio Cables
between the DVI IN
[R-AUDIO-L] jack on the
TV and the AUDIO OUT jacks
on the DVD player/
Set-Top Box.
DVD Player / Set-Top
Box
TV Rear Panel
!i!
DVI to HDMI Cable (Not supplied)
>_ Each DVD ptayer/STB has a different back panel configuration.
>- When connecting a DVD player/STB, match the color of the connection terminal to
the cable.
_'- When using an HDMI/DVI cable connection, you must use the HDMI/DVI IN terminal.
Connecting a Digital Audio System
The rear panel jacks on your TV make it easy to connect a Digital Audio System to your TV.
Connect an Optical Cable
between the "DIGITAL
AUDIO OUT (OPTICAL)"
jacks on the TV and the
Digital Audio Input jacks on
the Digital Audio System.
When a Digital Audio
System is connected to the
'DIGITAL AUDIO OUT
(OPTICAL)" terminal:
Decrease the volume
of the TV, and adjust the
volume level with the
system's volume control.
Digital Audio System
TV Rear Panel
>- 5.1CH audio is possible when the TV is connected to an external device supporting 5.1CH.
> Each Digital Audio System has a different back panel configuration..

Publicidad

Capítulos

loading

Este manual también es adecuado para:

Ln-t1954h