Connecting Cable Tv - Samsung LN-T1953H Instrucciones Del Propietario

Connecting Cable TV
To connect to a cable TV system, follow the instructions below.
Cable without a Cable Box
1. Plug the incoming cable into the ANT 2 IN (CABLE) terminal on the back of the TV.
Because thisTV is cable-ready, youdonotneeda cableboxto viewunscrambled c ablechannels.
Connecting toto a Cable Box that Descrambles All Channels
1. Find the cable that is connected to the ANT OUT terminal on your cable box.
_'_This terminal m ightbe labeled"ANTOUT","VHFOUT"or simply,"OUT".
2. Connect the other end of this cable to the ANT 2 IN (CABLE) terminal on the back of the TV.
Connectinqto a Cable Box that Descrambles Some Channels
If your cable box descrambles only some channels (such as premium channels)_ follow the instructions below. You will need a two-
way splitter, an RF (A/B) switch, and four lengths of RF cable. (These items are available at most electronics stores.)
Find and disconnect the cable that is
connected to the ANT IN terminal on your
cable box.
::_ This terminal m ightbe labeled"ANTIN",
"VHFIN"or simply,'qN".
2. Connect this cable to a two-way splitter.
Connect an RF cable between the OUTPUT
terminal on the splitter and the IN terminal
on the cable box.
Incoming
cable
Splitter
incoming
cable
Splitter
J
Cable Box
4,
Connect an RF cable between the
ANT OUT terminal on the cable box and
the B-IN terminal on the RF(A/B) switch.
Incoming
cable
Splitter
Switch
Connect another cable between the other
OUT terminal on the splitter and the A-IN
terminal on the RF (A/B) switch.
_bl. SZer RF_B_
Cable BOX Switch
Connect the last RF cable between the
OUT terminal on the RF (A/B) switch and
the ANT IN terminal on the rear of the TV.
cable Splitter L _ RF (A/I v B)
Cable Box Switch
After you have made this connection,set the A/B switchto the "A" position for normalviewing. Set the A/B switchto the "B" position to
view scrambled channels. (When you set the A/B switchto "B", you will need to tune your TV to the cable box's output channel,which is
usually channel 3 or 4.)