Adjusting The Color Tone; Freezing The Picture; Setting The Film Mode - Samsung LN-T1953H Instrucciones Del Propietario

Adjusting the Color Tone
You can change the color of the entire screen according to your preference.
1. Press the MENU button to display the menu.
Press the ENTER button to select "Picture".
2. Press the _, or V buttons to select "Color Tone", then press the ENTER button.
3. Press the A or T buttons to select "Cool2", "CoolI"_ "Normal"_"Warml"_
or "Warm2".
Press the ENTER button.
>- When the picture mode is set to Dynamic or Standard, Warm1 and Warm2
cannot be selected. Movie mode is only available.
This function is available in PC mode.
Resetting the Picture Settings to the Factory Defaults
1. Press the A or _' buttons to select "Reset", then press the ENTER button.
Press the A orV' button to select "OK", or "Cancel', then press the ENTER button.
Press the EXIT button to exit.
>- Each mode can be reset.
Freezing the Picture
1. Press the STILL button to freeze a moving picture.
Normal sound wilt still be heard. Press again to cancel.
:_ While V-Chip is in operation, the Still function cannot be used.
Setting the Film Mode
You can: automatically senses and processes film signals from altsources and adjusts the picture for optimum quality.
1. Press the MENU button to display the menu.
Press the A or V buttons toselect "Setup", then press the ENTER button.
2. Press the h, or T buttons to select "Flim Mode"_then press the ENTER button.
3. Press the A or _' buttons to select "On" or "Off'_ then press the ENTER button.
Press the EXIT button to exit.
>- Film mode is supported in TV, VIDEO_ S-VIDEO, and COMPONENT480i.