Switching On/Off - Eschenbach mobilux DIGITAL Touch HD Manual De Instrucciones

Operation
Charging the internal battery:
before you use the mobilux DIGITAL Touch HD for the first time, you must fully charge the internal battery.
To charge, connect the USB plug of the charger with the USB/charger socket (e) of the reader. Then connect
the charger with the plug appropriate for the operating location and plug the charger into a power outlet.
Charging takes about 2 hours. The charging indicator LED (t) will light up red during the charging process.
Once the charging process is complete, the LED charging control lamp goes out. Disconnect the charger from
the electrical outlet and the reader once charging is completed.
You can use the reader during the charging process. Using the reader while charging will, however, prolong
the charging time.

Switching on/off

Press and hold the On/Off button (w) for a second to turn on mobilux DIGITAL Touch HD and to switch to live
image mode. The enlarged image of the reading material will appear on the display (q).
On the upper edge of the display, icons appear for 5 seconds to display the battery charge level, the last set
zoom level and the display brightness.
- 29 -