Electrical Connections - GE Lumination DI Adjustable Serie Guia De Instalacion

Electrical Connections

Connect the black (line) of the AC line to the black 120V, 277V,
or 347V wire. Connect the white (neutral) wires of the AC line
to the white wires using the provided 18-12 AWG push-in
connectors. Connect the green wire to the ground screw.
Optional: If using a 0-10V dimming controller, connect
matching-colored wires together.
Risk of damage: Make sure that supply connection, light
fixture wiring, and dimming cables are connected to proper
driver inputs. Wrong connection may cause damage to the
product.
Must use UL approved conduit fittings for all enclosure
box connections to prevent wire cuts by sharp edges and
excessive strain on wiring.
Wiring the Thermal Protector
Black Blue
120V
White Common
277V
Red Blue
277V
White Common
Blue
White
Black
347V TRANSFORMER
120V
347V
Line
Neutral
Common
Black 347V Input
0-10V dimming
controller (optional)
To LED
0-10V Dimming Lighting Controller (optional)
0-10V wiring diagram
Line (black)
Neutral (white)
Ground (green)
(1-10) + (violet)
(1-10) - (gray)
Make appropriate connections to the output wires of the
LED driver using twist-on wire connectors. Follow lighting
controller installation instructions.
NOTE: For 0-10V dimming SKUs.
Lutron Ecosystem Lighting Controller (optional)
Ecosystem Wiring Diagram
EcoSystem (purple)
EcoSystem (purple)
Line (black)
See Note
Neutral (white)
Ground (green)
Note: DL, for use with 3-wire fluorescent control, (Lutron System)
Thermal
protector
AC line
Line
DRIVER
Neutral
Ground
(0-10V) -
(0-10V) +
E1
E2
L
DRIVER
DL
N