Key Board Display Status - toscano TDS600 Serie Manual De Usuario

Item
Digital display
A, Hz, V
MOD
ALM
FWD
REV
5.2.4. Key board display status
TDS600 keypad display status is classifi ed as Waiting status parameter
display; Function code parameter editing status display; Malfunction alarm
status display; Run status parameter display; Alarm state display in total 5
kinds of status. LED indicator light will all be lit after the inverter electrifi ed.
Then enter into set frequency display. As shown in Fig.5-3 a
01. Waiting parameter display status
The inverter is in waiting status and waiting status supervision parameter
is displayed on keyboard: normally parameter F00.13 decide which status
supervision parameter to be displayed. As shown in Fig.5-3 b, the unit is
indicated by rightward unit indicator light.
To press key, it can display different waiting status supervision parameter
circularly: for detail please see C-00 to C-05 group supervision parameter
details decide by F00.07~F00.12.
Display current run status parameter and set parameter
Unit for relevant current digital displayed physical parameter (for current
is A: for voltage is V:for frequency is Hz)
This indicator light is lit in non-supervision status;
if no key pressed for a minute: then come back to supervision status
Alarm indicator light: indicate that the inverter is in over current or over
voltage suppressing status or failure alarm status currently
Forward run indicator light, indicate
that the inverter output forward phase
order and the connected motor rotate in
forward direction
Reverse run indicator light: indicate
that the inverter output reverse phase
order and the connected motor rotate in
reverse direction
5. Run and operation explanation for inverter
Function description
The inverter work in DC brake
status if FWD, REV indicator
light is lit at the same time
159