Loading The Instax Square Film Pack - FujiFilm INSTAX SHARE SP-3 Manual De Instrucciones

Loading the instax SQUARE Film Pack

Caution
Do not open the back cover until you have used up all the film; otherwise, the rest of the film will
become exposed and turn white.The film can no longer be used.
• When you load the film pack, never press the two rectangular holes on the back of the film pack.
• Never use a film pack beyond its shelf life; otherwise, it may damage the printer.
Use FUJIFILM Instant Film "instax SQUARE" only. The instax mini film or instax WIDE film cannot be used.
Notes on the film pack
• Each FUJIFILM Instant Film "instax SQUARE" pack contains 1 black film protective cover and 10 film sheets.
• Do not remove the film pack from its inner bag before loading it into the printer.
• The film cover is ejected automatically when the back cover is closed.
For details, refer to the instructions and warnings on FUJIFILM Instant Film "instax SQUARE".
~
Pull the back cover lock down to open the back
cover.
instax_BO-C_6lang.indb 7 instax_BO-C_6lang.indb 7
Ÿ
2
1
Hold both sides of the film pack, align the bottom of the
film pack on the groove of the film chamber (1), then insert
it straight (2).
Continued on the next page
EN
7
2017/9/14 15:21:10 2017/9/14 15:21:10