Turning On/Off The Printer; Checking Remaining Battery Life - FujiFilm INSTAX SHARE SP-3 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 87
Loading the instax SQUARE Film Pack
(Contunued)
EN
!
8
instax_BO-C_6lang.indb 8
instax_BO-C_6lang.indb 8
Close the back cover.
Make sure the back
cover lock clicks into
place.
The film cover (black) is ejected
automatically when the back
cover is closed. Remove the film
cover from the print exit.

Turning on/off the Printer

Press and hold the POWER button for approx. 1 second
to turn the printer on or off.
Turning on the printer lights up the remaining battery
LED.
If no operation occurs for a certain period of time, the
printer turns off automatically.

Checking Remaining Battery Life

Use the remaining battery LED to check when turning
the printer on or while printing is in progress.
Indication
Remaining battery life
Green
Sufficient
Orange
At half capacity
Low. Charging the battery is
Red
recommended. (See page 6.)
Printer turns off
No battery capacity remains.
after flashing red.
Charge the battery. (See page 6.)
2017/9/14 15:21:10
2017/9/14 15:21:10

Hide quick links:

Publicidad

Tabla de contenido
loading

Tabla de contenido