Hitachi D 10VF Instrucciones De Manejo página 7

DRILL SAFETY WARNINGS
1. Wear ear protectors with impact drills.
Exposure to noise can cause hearing loss.
2. Use auxiliary handles supplied with the tool.
Loss of control can cause personal injury.
SPECIFICATIONS
Model
Voltage (by areas)*
Power input
No load speed
Drill chuck capacity
Steel
Capacity
Wood
Weight (without cord)
Spec. for keyed chuck
Spec. for keyless chuck
*Be sure to check the nameplate on product as it is subject to change by areas.
<Capacity with Angle attachment (Optional accessory for D13VF and D13VG)>
Model
Speed of angle unit
Steel
Capacity
Wood
STANDARD ACCESSORIES
<D10VF>
(1) Chuck wrench (Spec. only for keyed chuck) ...... 1
<D10VG and D13VF>
(1) Side handle ................................................................ 1
(2)Chuck wrench (Spec. only for keyed chuck) ........ 1
<D13VG>
(1) Side handle ................................................................ 1
(2) Handle joint ................................................................ 1
(3) Chuck wrench (Spec. only for keyed chuck) ...... 1
Standard accessories are subject to change without notice.
OPTIONAL ACCESSORIES (sold separately)
<D10VF>
(1) Side handle
(2) Hook (A)
<D10VG>
(1) Hook (A)
D10VF
0–3,000min
Twist Bit 10 mm
Hole Saw
Flat Spade Bit 25 mm
Auger Bit
Hole Saw 29 mm
1.8 kg
1.8 kg
LOW(650min
Twist Bit 13 mm
Hole Saw 64 mm
Flat Spade Bit 40 mm
Auger Bit 38 mm
Hole Saw 114 mm
3. Hold the drill and side handle securely with both
hands when using.
4. Do not wear gloves made of stuff liable to roll up
such as cotton, wool, cloth or string, etc.
5. Prior to drilling into walls, ceilings or floors, ensure
there are no electric cables or conduits inside.
D10VG
(110V, 220V, 230V, 240V)
710W*
–1 –1
0–1,200min
10 mm
10 mm
– 38 mm
32 mm
– –
70 mm
1.9 kg
1.9 kg
D13VF
–1 ) HIGH(1350min
13 mm
32 mm
32 mm
29 mm
64 mm
<D13VF and D13VG>
(1) Hook (A)
(2) Angle attachment
Optional accessories are subject to change without notice.
APPLICATIONS
Boring holes in metal, wood and plastic.
PRIOR TO OPERATION
1. Power source
Ensure that the power source to be utilized conforms
to the power requirements specified on the product
nameplate.
2. Power switch
Ensure that the power switch is in the OFF position.
If the plug is connected to a receptacle while the
power switch is in the ON position, the power tool
will start operating immediately, inviting serious
accident.
D13VF
–1
0–850min 0–600min
13 mm
13 mm
51 mm
40 mm
32 mm
102 mm 114 mm
2.1 kg
2.0 kg
D13VG
–1 ) LOW(400min –1 ) HIGH(900min
13 mm
70 mm
40 mm
38 mm
114 mm 102 mm
English
D13VG
–1
13 mm
70 mm
40 mm
38 mm
2.1 kg
2.0 kg
–1 )
13 mm
51 mm
40 mm
32 mm
6