Sagem D16T Manual Del Usuario página 115

4.1.7. Ending a call
To end a call press
You can, however, return on the screen saver by pressing
4.1.8. Redialling a call
The last five numbers you have dialled can be quickly redialled.
Redialling from Standby Mode:
3. Press key. The phone number that was last dialled appears on the display.
4. Press the or
numbers called).
5. Press key to dial out the number.
4.1.9. Microphone mute function
During a call you can switch OFF the microphone. The call is placed on hold.
- Enable MUTE
shows "Mute on". Your correspondent will not be able to hear you.
- Disable MUTE function: Press the
4.1.10. Recall / Flash
Press the key to access line transfer offered by PABX or call waiting provided by telephone
Company.
4.1.11. Temporary tone
In pulse dialling, you can use temporary tone dialling to temporarily access touch-tone service
offered by banks.
1. Press the
2. Press the number key and follow the voice instructions.
3. After you hang up, the phone automatically returns to dial pulse (rotary) service.
4.1.12. Paging the handset
To locate a misplaced handset:
Press the key at the base station, "paging" flashes on the screen of the handsets registered
on your D16T/D18T base station until you press a handset key or until you press
base station again.
4.2.
Calling line identification presentation (CLIP)
This CLIP phone stores and displays CLIP information provided by your local telephone
company.
You must subscribe to CLIP service in order to use this unit.
If you have not subscribed to CLIP service or if the caller number is «suppressed», the display
shows unknown.
. The timer remains displayed on the screen for 10 seconds.
key to review redial telephone list. (You can select to redial your last five
function: Press
key after call is answered.
.
the key during
key to continue the call.
- 6 -
English
a call. The display
on the