Tone Settings - Sagem D16T Manual Del Usuario

D16T/D18T/D21T
6.3.2. Two outside calls
Taking a second call while you are already on line
During a call, a beep is emitted by your operator to inform you that a second call is on hold. A
screen displays the number of this second caller on hold.
Press to take back this new call.
Your first contact is put on hold and you can talk with the second caller.
Making a second call while you already on line
During a conversation, press
The call in process is then put on hold and you can take the second call back.
Switching from one call to the other
To switch from one call to the other, press
The call in process is then put on hold and you can take the second call back.
Ending one of the two calls
To end one call and continue with the other, press
The call in process is then ended finally and you take the second call back.
To set up a 3-way conference (the 2 calls and yourself)
During a conversation, press
You can then talk with the 2 contacts at the same time.
To end the 3-way conference, press the red key
7. Customising the handset
7.1.
Handset naming
This function allows you to change the name of your handset.
1. Press , select "personal set" using the
2. "handset name " appears on the screen. Press
- Use the keypad to enter the new name (up to 10 characters).
- Use key to delete wrong input if necessary.
3. Press key to confirm your selection. You will hear a confirmation tone.
7.2.

Tone settings

7.2.1. Handset ringer level
You can choose from four ringer volumes.
1. Press , select "personal set" using the
2. Using the
then dial the number to be called.
then the key
or key, select "handset tone". Press
then the key
then the key
.
.
or key, Press
.
or key, Press
.
- 11 -
.
.
.
.