Sagem D16T Manual Del Usuario página 125

3. A confirmation screen appears, press
- If you want to confirm the reset, press
- To cancel the reset, press
4. You will hear a confirmation tone : the settings of your phone are restored to their initial
values.
9.6.
Prefix
This function sets:
- The prefix number: this number will be added at the beginning of the number you
dialled.
- The number to be detected: if the number you dialled starts with the recorded
sequence, this sequence will be automatically deleted and the prefix number will be
added.
If you don't set "The number to be detected", "The prefix number" will be automatically added to
all numbers that you dial.
These two settings are not applied if number you dialled starts with "#", "*" or "P".
1. Press . Select "advanced set" using the
2. Using the or
3. Select "detect digit" to define the number to be detected.
4. Select "prefix" to specify the prefix to be added.
5. Press key to confirm your selection. You will hear a confirmation tone.
9.7.
Flash timing
If you connect your telephone to a private automatic branch exchange or use it in a foreign
country, you may need to modify the flash duration in order to use your telephone correctly with
regard to the following functionalities: outgoing 2nd call, incoming 2nd call, conference call.
Contact your administrator, who will supply the appropriate time period, and proceed to the new
settings.
1. Press . Select "advanced set" using the
2. Using the or
3. Three choices are available : " short ", " medium " and " long ".
4. Select the appropriate time period.
5. Press key to confirm your selection. You will hear a confirmation tone.
9.8.
Modifying the dialing mode
Most telephone systems use the tone dialling mode. You can, however, use the pulse dialling
mode. To select a dialling mode, follow this procedure:
1. Press . Select "advanced set" using the
2. Using the or
Two modes are available: "tone" et "pulse".
3. Press key to confirm your selection. You will hear a confirmation tone.
.
key, select "auto prefix". Press
key, select "recall time". Press
key, select "dial mode". Press
- 16 -
.
.
or key, press
.
or key, press
.
or key, press
.
English
.
.
.