Basic Operation; Listening To A Record - Teac GF-650 Manual Del Usuario

Basic Operation

2
1
1
Press the POWER switch to turn the unit on.
2
Select a source by pressing the corresponding button.
< To listen to an external source connected to AUX jacks, select
AUX by pressing the PHONO/AUX button once or twice.
3 Play the source, and adjust the volume by turning the
VOLUME knob.
14
3

Listening to a Record

Caution:
< Before use, completely loosen the shipping screws by turning
them clockwise with a coin and remove the stylus guard.
< When turning on the power to the unit, the tone arm may
move if the cum was subjected to shock during transportation
and has been displaced.
When you use the GF-650 for the first time, turn on the
power to the unit leaving the vinyl tie intact to prevent the
tone arm from moving and leave the unit alone for more than
30 seconds. Thereafter remove the vinyl tie.
1
Press the PHONO/AUX button once or twice to select
PHONO.
2
Gently open the dust cover.
Be careful not to pinch your finger.
3
Put the record on the turntable.
When playing a 45 RPM record, use the included adaptor.
4 Select the size of record: 17cm or 30cm.
5
Select the speed: 33 or 45.