Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
User's instructions, Turbine vacuum cleaner
A1800S
4.
Press the foot button on the nozzle to set the combi nozzle for use on hard or
soft surfaces, see Figure 4. For use on hard surfaces, press the foot button on
the combi nozzle to extend the brushes. Lift the button for use on soft surfaces.
Figure 5
5.
The power cord has a yellow and red mark, see Figure 5. Pull out the cord to the
yellow mark.
PLEASE NOTE
•
Never pull out the power cord beyond the red mark. This could damage the power
cord.
6.
Insert the plug in the wall socket, and press the On/Off switch. To switch off the
appliance, press the On/Off switch again.
Figure 6
7.
The appliance is now ready for use. You can move the vacuum cleaner while
you are cleaning by pulling on the hose grip. You can lift the appliance with the
vacuum cleaner's handle.
Note
If so required, you can also reduce the suction quickly by moving the slide
on the hose grip.
EN
v 090715-06
Markings on the power cord
On/Off switch
31
Publicidad
Tabla de contenido
