Bestron A1800S Manual Del Usuario página 36

5.
6.
7.
Cleaning or replacing the HEPA filter
For best results clean or replace the HEPA filter after every second or third use of the
vacuum cleaner, or more frequently if the filter is visibly blocked.
NOTE
1.
Figure 12
2.
3.
4.
5.
6.
PLEASE NOTE
•
•
•
Cleaning of replacing the exhaust filter
Replace the exhaust filter at least twice a year, and more frequently if the filter isvisibly
blocked.
1.
Figure 13
34 EN v 090715-06
If so required, use your hand to remove any waste sticking to the receptacle.
Close the bottom flap, and press until it clicks into place.
Fit the dust receptacle onto the appliance, and click it into position.
Clean the HEPA filter regularly to avoid that the filter becomes clogged and
the engine overheated.
Remove the waste from the dust receptacle (see "Removing waste from the dust
receptacle").
Removing the HEPA filter
Turn the cover/filter from the dust receptacle.
Turn the HEPA filter anti-clockwise to release it, and then remove it from the cover.
Rinse both thoroughly in lukewarm water.
Allow the HEPA filter and the holder to dry thoroughly.
Fit the holder and HEPA filter to the dust receptacle in the reverse sequence. If
necessary, replace the HEPA filter.
Water could penetrate into the appliance if the filter is not thoroughly dry. This
could result in (electrical) damage.
Do not clean the filter in a washing machine.
Do not dry the filter with a hairdryer.
Remove the plug from the wall socket.
Removing the exhaust filter
User's instructions, Turbine vacuum cleaner
A1800S