Troubleshooting; Conditions Of Warranty - Zibro D 112 Instrucciones De Uso

TROUBLESHOOTING

Check the following before contacting technical support:
Problem
The unit does not work.
The device does not
dehumidify.
The dehumidifier works,
but reduces the relative
humidity insufficiently.

CONDITIONS OF WARRANTY

There is a two-year warranty on your dehumidifier from the date of purchase. All material
or manufacturing defects will be repaired free of charge.
The following applies:
• All claims for compensation, including consequential damage, will not be
entertained.
• Any repairs or replacement of components during the warranty period will not result
in an extension of the warranty period.
• The warranty will expire if any alterations have been made, not genuine components
have been fitted or if the dehumidifier has been repaired by a third party.
• Components subject to normal wear and tear, such as the air filter, are not covered by
the warranty.
• The warranty is only valid on presentation of the original, unaltered, and date-
stamped purchase receipt.
• The warranty does not cover damage caused by actions that deviate from those as
described in the user's manual or by neglect.
Cause
The powercord is not connected.
The hydrostat setting is too low.
The water container is full.
The water container has not
been replaced correctly.
The air filter is clogged.
The temperature or relative
humidity in the room where the
device is operating is too low.
The room is too large.
There are too many sources of
humidity.
There is too much ventilation.
Solution
Insert the plug into the wall
outlet.
Turn the hydrostat to the
desired setting.
Remove the water from the
container.
Place the water container in the
correct position.
Clean the air filter.
It is normal that the device does
not dehumidify in these
conditions.
We recommend using a
dehumidifier with a greater
capacity.
We recommend using a
dehumidifier with a greater
capacity.
Reduce ventilation (e.g. close
curtains and shut doors).
4
59