Overview Of The Components; Using The Appliance - Clatronic BS 1287 Instrucciones De Servicio

Ocultar thumbs Ver también para BS 1287:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 17
• Cleaning and user maintenance shall not be made by chil-
dren without supervision.
• Do not suck up liquids!
• Do not suck up hot ashes or pointed or sharp objects!
• Do not use the device in damp rooms!
• Never use without the filter. Check that the filter is inserted
correctly!
• Hair, clothing and body parts away from the vacuum nozzle
during use!
• Keep the vacuum cleaner away from sources of heat like
radiators, ovens, etc.!

Overview of the Components

1 Power cord with plug
2 Carrying handle
3 Cable-winding button
4 Suction power control
5 On/off switch
6 Dust bag filling display
7 Connection head of the vacuum hose
8 Hose connection
9 Handle for opening the dust bag compartment
10 Suction hose
11 Air adjustment slide
12 Two-piece suction tube
13 Floor nozzle (with hook (not shown))
14 Lever for extending and retracting the brushes
Accessories not shown:
Groove and brush nozzle
Start-up
Insert the connection head of the suction hose into
the hose connector until it locks in place. To do so,
please press the buttons simultaneously. In order
to release the hose again, please press the buttons
once more on the connection head.
Keep the buttons pressed down and then pull out the
hose.
Insert the vacuum tube into the handle if required.
Then assemble the floor nozzle and/or the accesso-
ries.
26

Using the Appliance

1. Unwind the length of cable you require.
CAUTION:
Pull out the cable up to the maximum length
indicated with the yellow mark.
Never pull the cable out up to the red mark as
the cable winding can be damaged.
NOTE:
If the red mark is visible, pull in the cable with the
help of the cable winding button back to the yellow
mark.
2. Insert the mains plug into a correctly installed power
socket. Turn the device on by the on/off switch by
pressing down the button.
3. Set the "carpet/hard floor" switch, depending on the
floor covering.
4. Adjust the suction power with the suction power
control.
5. Vacuum at a steady speed. There is no need to exert
pressure.
NOTE:
Pay attention to the range that can be covered with
the cable length!
Suction power control (4)
Low suction power:
Moderate suction power:
High suction power:
for curtains, sensitive mate-
rial.
for deep pile velour carpets
and textile floor covering.
for robust carpets and
floors.

Publicidad

Tabla de contenido
loading

Tabla de contenido