MESTO PROFI 3270 Serie Instrucciones De Uso página 12

plant protection liquids.
EN
Only trained, healthy and rested people may work with the device. You
EN
should not be under the influence of alcohol, drugs or medication.
Devices may not be used for spraying Children and adolescents must not use the device
Safety
plant protection liquids. Keep the spraying devices safe from access to children.
Take precautions to prevent hazardous substances from being misused.
Only trained, healthy and rested people may work with the device. You
→ Accident risk!
should not be under the influence of alcohol, drugs or medication.
Children and adolescents must not use the device
Keep bystanders away during spraying.
Keep the spraying devices safe from access to children.
Never spray on people, animals, electrical devices and lines, into the wind,
Take precautions to prevent hazardous substances from being misused. or into bodies of water.
→ Accident risk! → Risk of injury!
Keep bystanders away during spraying. Wear appropriate protective clothing, goggles and respiratory protection in line
Never spray on people, animals, electrical devices and lines, into the wind, with the applicable national regulations when working with hazardous substances.
or into bodies of water.
Avoid ignition sources in the environment.
→ Risk of injury!
Do not allow the device to remain under pressure and/or exposed directly to
Wear appropriate protective clothing, goggles and respiratory protection in line
sunlight. Make certain the device is not heated beyond the maximum
with the applicable national regulations when working with hazardous substances.
operating temperature. (→Table 1).
Avoid ignition sources in the environment. Protect the device from frost and ammonia.
Do not allow the device to remain under pressure and/or exposed directly to Never blow through the nozzles or valves with your mouth.
sunlight. Make certain the device is not heated beyond the maximum → Risk of poisoning!
operating temperature. (→Table 1).
There is a risk of slipping or tripping on smooth or wet surfaces, snow, ice,
Protect the device from frost and ammonia.
on slopes and on uneven terrain.
Never blow through the nozzles or valves with your mouth.
Repairs and modifications to the device are not permitted.
→ Risk of poisoning!
Have damaged parts or parts that do not work properly repaired immediately
There is a risk of slipping or tripping on smooth or wet surfaces, snow, ice, by our customer service department or by service partners authorized by us.
on slopes and on uneven terrain.
The effect of the safety valve must not be bypassed or made inoperative.
Repairs and modifications to the device are not permitted. → Explosion hazard!
Have damaged parts or parts that do not work properly repaired immediately
Use only original spare and accessory parts.
by our customer service department or by service partners authorized by us.
We cannot assume any liability resulting from the use of third-party parts.
The effect of the safety valve must not be bypassed or made inoperative.
When pumping, always observe the pressure gauge to ensure the maximum
→ Explosion hazard!
spraying pressure is not exceeded (→ Table 1).
Use only original spare and accessory parts. All excess pressure must be released from the device before filling, after
use, before carrying out maintenance work, on work breaks, and before We cannot assume any liability resulting from the use of third-party parts.
placing it in storage.
When pumping, always observe the pressure gauge to ensure the maximum
spraying pressure is not exceeded (→ Table 1). Points to note when transporting the device: Transport the device in such
All excess pressure must be released from the device before filling, after a way that it is protected against damage and tipping. All excess pressure
use, before carrying out maintenance work, on work breaks, and before must be released from the device.
→ Explosion hazard! placing it in storage.
Points to note when transporting the device: Transport the device in such
a way that it is protected against damage and tipping. All excess pressure
must be released from the device.
→ Explosion hazard!
Sicherheit_1018_alle.indd 2
Sicherheit_1018_alle.indd 2
2
2
12
ENGLISH
ENGLISH
31.10.2018 11:49:34
31.10.2018 11:49:34