SICK PLS Serie Manual Del Usuario página 176

PLS
5. Have measures been taken to prevent unprotected access
to a protected danger area (mechanical point-of-operation
guarding) and to monitor this eventuality, and are these
measures safeguarded to prevent their removal?
6. Are additional mechanical safety devices installed to pre-
vent access above, beneath and around the protected
area, and are these secure against manipulation?
7. Has the maximum stopping or run-on time of the machinery
been checked and is it indicated (on the machine and/or in
the machine documents) and documented?
8. Is the required safety distance maintained between the
NCSD and the nearest danger area?
9. Are the NCSD devices properly mounted and secured
against displacement after adjustment?
10. Are the required safety measures to prevent electric shock
effective (protection class)?
11. Is the command unit for resetting the (NCSD) safety device
or for restarting the machine present and properly in-
stalled?
176
© SICK AG • Industrial Safety Systems • Germany • All rights reserved
Yes
Yes
Yes
Yes
Yes
Yes
Yes
8 008 321/M844/06-05-02 Operating Instructions • PLS
GB
No
No
No
No
No
No
No