Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
DE
Open
EN
FR
NL
IT
4.
Fill with water and screw the lid closed. Note: To prevent appliance damage
ES
the temperature of the water used should not be over 40°C. We advise to use
PL
distilled or boiled, cooled down water
5.
Reverse the water tank and insert it into the housing. It is recommended to
first guide the lower side of the water tank into the housing and then slide
in the water tank using the handle.
6.
Ensure that the water tank is properly inserted.
7.
The water in the water tank must be changed at least once a week in order to
prevent lime-scale and algae build-up. For hygienic reasons we recommend
changing the water several times a week.
8.
You can drain excess water via the water drain on the underside of the appli-
ance. Unscrew the cover an tilt the appliance slightly to the rear, e.g. over a
shallow bowl. Let the water flow out and then seal the water drain.
Attention: Do not fill water directly into the appliance.
26 von 96
Copyright UNOLD AG | www.unold.de
Fig. 4
Closed
.
Stand 15.6.2020
Publicidad
Tabla de contenido
