Bosch GLI18V-2200C Instrucciones De Funcionamiento Y Seguridad página 11

GLI18V-2200C 11-18.qxp_GLI18V-2200C 11/5/18 10:17 AM Page 11
strength indicated by vertical bars.
You can use toggle switch to
disconnect the tool from your
mobile device.
F. LED – Turn light on and off
G. Brightness – Toggle between off,
the low brightness setting, and the
high brightness setting.
H. Timer – Allow the light or group of
lights to be automatically switched
on or off after a specified amount
of time.
▶ Service
INSIDE. Preventive maintenance
performed
personnel may result in misplacing
of internal wires and components
which could cause serious hazard.
We recommend that all tool service
be performed by a Bosch Factory
Service Center or Authorized Bosch
Service Station.
Disconnect tool and/or charger from
power source before servicing.
▶ Batteries
Be alert for battery packs that are
nearing their end of life. If you notice
decreased tool performance or
significantly shorter running time
Connectivity
Maintenance
To avoid accidents, always disconnect the tool and/or charger
from the power supply before cleaning.
NO USER SERVICE-
ABLE PARTS
by unauthorized
SERVICEMEN:
Interval – Allow the light or group
of lights to be automatically
switched on or off at a specified
time of day.
I. Tool alerts – tapping the 'alerts
triangle' will display any alerts
received from the tool.
J. Info button – displays tool
information and specifications.
between charges then it is time to
replace the battery pack. Failure to do
so can cause the tool to operate
improperly or damage the charger.
▶ Cleaning
damage plastic parts. Some of these
are: gasoline, carbon tetrachloride,
chlorinated
ammonia and household detergents
that contain ammonia.
To avoid damage, clean the plastic
lens of the cordless floodlight only
with a dry, soft cloth. Do not use
cleaning agents or solvent.
-11-
Certain cleaning
agents and solvents
cleaning solvents,