Hazards Of Use - Leica Geosystems Sprinter 150 Manual Del Usuario

Manufacturers of non Leica Geosystems accessories
EN
The manufacturers of non Leica Geosystems accessories for the
DE
product are responsible for developing, implementing and commu-
nicating safety concepts for their products, and are also responsible
FR
for the effectiveness of those safety concepts in combination with
the Leica Geosystems product.
ES
Person in charge of the product
IT
The person in charge of the product has the following duties:
• To understand the safety instructions on the product and the
PT
instructions in the user manual.
NL
• To be familiar with local regulations relating to safety and acci-
dent prevention.
NO
• To inform Leica Geosystems immediately if the product and the
SV
application becomes unsafe.
WARNING
FI
The person responsible for the product must ensure that it is
DA
used in accordance with the instructions. This person is also
accountable for the training and the deployment of personnel who
use the product and for the safety of the equipment in use.

12.5 Hazards of Use

WARNING
The absence of instruction, or the inadequate imparting of
instruction, can lead to incorrect or adverse use, and can give rise
to accidents with far-reaching human, material, financial and envi-
ronmental consequences.
Safety Directions
Precautions:
All users must follow the safety directions given by the manufacturer
and the directions of the person responsible for the product.
CAUTION
Watch out for erroneous measurement results if the product
has been dropped or has been misused, modified, stored for long
periods or transported.
Precautions:
Periodically carry out test measurements and perform the field
adjustments indicated in the user manual, particularly after the
product has been subjected to abnormal use and before and after
important measurements.
DANGER
Because of the risk of electrocution, it is very dangerous to
use staffs in the vicinity of electrical installations such as power
cables or electrical railways.
Precautions:
Keep at a safe distance from electrical installations. If it is essential to
work in this environment, first contact the safety authorities respon-
sible for the electrical installations and follow their instructions.
CAUTION
Strong magnetic fields in the immediate vicinity (e.g. trans-
formers, melting furnaces...) may influence the compensator and
lead to measuring errors.
23
Sprinter 150/150M/250M - 1.0.0en