Brewing Filter Coffee; Time And Automatic Start - Klarstein Arabica Manual De Instrucciones

EN
14

BREWING FILTER COFFEE

1 Open the lid of the water tank and pour clean drinking water into the
designated container according to the capacity.
2 Add coffee powder to the nylon filter with a spoon. A coated spoon usually
makes a first-class cup of coffee. You can also customize coffee powder to
your taste, of course.
3 Close the lid and connect the device to the power supply. The display will
show 12:00.
4 Insert the nylon filter in the filter holder.
5 Slide the carafe onto the hotplate. Make sure to align the centerlines of the
carafe and the filter holder.
6 Press any key and the display will show [12:00]. Press the ON / OFF button
once, the red indicator will light up and the coffee will automatically start
brewing after a while. Note: you can also remove the carafe during operation
to pour a cup of coffee in advance. However, the carafe should be returned
to the hotplate within 30 seconds to prevent coffee from flowing over the edge
of the filter holder.

TIME AND AUTOMATIC START

Note: This function is only relevant for the preparation of filter coffee.
The device has a programming function:
1 Press the PROG button. You can now set the current time.
2 When the display shows CLOCK, press the HOUR and MIN buttons to set the
current time from 0:00 to 23:59.
3 When the display shows TIMER, press the HOUR and MIN buttons to set the
preset time from 0:00 to 23:59 for automatic operation.
4 Select the intensity of the coffee by pressing the MODE button and selecting 1
bean, , 2 beans 3 beans .