General Precautions - Brother P-touch EDGE 7500 Guía De Usuario

General Precautions

●
Do not use the P-touch labeler in any way or for any purpose not described in this
guide. Doing so may result in accidents or damage to the machine.
●
Do not put any foreign objects into the tape exit slot, AC adapter connector, or
USB port (for PT-7600 only), etc.
●
Do not touch the print head with your fingers. Use a soft wipe (e.g. a cotton swab)
when cleaning the print head or the optional print head cleaning cassette (TZ-CL4)
when cleaning the print head.
●
Do not clean the machine with alcohol or other organic solvents. Only use a soft,
dry cloth.
●
Do not place the P-touch labeler/battery in direct sunlight or rain, near heaters or
other hot appliances, in any location exposed to extremely high or low
temperatures (e.g. on the dashboard or in the back of your car), high humidity, or
dusty locations. Standard operating temperature range: (50 °F to 95 °F).
●
Do not leave any rubber or vinyl on the machine for an extended period of time,
otherwise the machine may be stained.
●
Depending on the environmental conditions and the applied settings, some
characters or symbols may be difficult to read.
●
Use only Brother TZ tapes with this machine. Do not use tapes that do not have the
mark.
●
Do not pull or apply pressure to the tape in the cassette. Otherwise the tape cassette
or P-touch labeler may be damaged.
●
Make sure that the release lever is up when closing the back cover. The back cover
cannot be closed if the release lever is pressed down.
●
Do not try to print labels using an empty tape cassette or without a tape cassette set
in the P-touch labeler. Doing so will damage the print head.
●
Do not attempt to cut tape while printing or feeding since this will damage the tape.
●
It is recommended that you use the USB cable supplied with the P-touch labeler.
Should another USB cable need to be used, ensure it is of high quality construction
(for PT-7600 only).
●
Be careful not to scratch the CD-ROM. Do not place the CD-ROM in any location
exposed to high or low temperatures. Do not place heavy objects on the CD-ROM
or bend it (for PT-7600 only).
●
The software on the CD-ROM is intended for use with the P-touch labeler and may
be installed on more than one PC (for PT-7600 only).
●
We strongly recommend that you read this User's Guide carefully before using
your P-touch labeler, and then keep it nearby for future reference.
v