Brother P-touch EDGE 7500 Guía De Usuario página 54

Press r so that the second number in the range displayed below BLOCK NO.
4
is flashing.
Press u or d until the desired block number is displayed (or use the
5
number keys to type in the desired setting).
Press n (or p). START appears in the Print Option menu.
6
Press n (or p) to begin printing the specified number of labels. The
7
number of each copy is displayed while it is being printed.
☞ To specify settings for additional Print Option functions, instead of continuing with
7
step , press
menu, and then press
Printing mirrored labels
This function prints your label so that the text can be read
from the adhesive side of the tape. If mirror-printed labels are
attached to glass or some other transparent material, they can
be read correctly from the opposite side.
Press g, then a.
1
Press l or r until MIRROR is displayed.
2
Press u or d until ON is displayed.
3
Press n (or p). START appears in the Print Option menu.
4
Press n (or p) to begin printing the specified number of labels. The
5
number of each copy is displayed while it is being printed.
☞ When using the Mirror Printing function, the text should be printed on clear tape.
☞ To specify settings for additional Print Option functions, instead of continuing with
5
step , press
menu, and then press
38
u d
or until CONTINUE is displayed in the Print Option
n
.
u d
or until CONTINUE is displayed in the Print Option
n
.
ABC
OFF
A B C
ON