Formatting The Label; Specifying A Label Length; Specifying A Margin Size - Brother P-touch EDGE 7500 Guía De Usuario

Category
O
OTHERS
Z
PERSONAL
CATEGORY
☞ Once the
PERSONAL symbol category becomes full
overwrite older ones unless the Symbol Save function is set to OFF
Specifying if the PERSONAL symbol category is continually updated

Formatting the Label

Specifying a label length

The length of the label can be specified as follows.
Press g, then A.
1
Press l or r until LENGTH is displayed.
2
Press u or d until the desired label length is
3
displayed (or use the number keys to type in the
desired setting).
Press n.
4

Specifying a margin size

The size of the margins for the left and right sides of the text can be specified.
Press g, then A.
1
Press l or r until MARGIN is displayed.
2
Press u or d until the desired margin
3
setting is displayed (or use the number keys to
type in the desired margin setting).
Press n.
4
28
00 01 02
*A maximum of 16 most recently selected symbols are
automatically saved in the PERSONAL symbol category for
quick and easy symbol use.
Symbols
03
, newly selected symbols will
0.10" to 4.00" (2.0 to 99.9 mm)
.
(Refer to
on page 44
0.30" to 39.00"
(6.0 to 999.9 mm)
.
)