Brother P-touch EDGE 7500 Guía De Usuario página 34

● BLOCK:
LENGTH:
MULTIPLE:
● FRAME:
●
PRINT:
●
ROTATE:
☞ The number of blocks can be specified or changed only with the BLOCK parameter.
Text blocks cannot be added or deleted in any other way.
☞ If the number of blocks specified in the PANEL2 Label Type mode is less than the
number of text blocks that have already been entered, entered text blocks are deleted.
If the specified number of blocks is greater than the number of entered text blocks,
text blocks are added.
☞ For these types of labels, we recommend using Extra Strength Adhesive Tape.
18
1 to 50 blocks
Default: 1
0.25" to 8.00" (6.0 to 200.0 mm)
Default: 0.70" (17.5mm)
x1 to x9
Default: 1
OFF, 1 , 2
4 , 5
7 , 8
Default: OFF
FRONT, REVERSE
Default: FRONT
OFF, ON
Default: OFF
, 3
, 6 ,
, 9
,