Product Image/Scope Of Delivery; Product's Identification Label; Assembling The Toilet Seat Raiser - B+B TSE-Easy 10 Manual De Instrucciones

TSE-Easy 10
| Toilet seat raiser

3.2. Product image/scope of delivery

At receiving the goods, please check that all components have been delivered.
The package should contain the following components (Fig. 1):

Toilet lid (1x)

Seat base (1x)

Hand screw (2x)

Clamp (2x)
User manual (1x)
Packing

3.3. Product's identification label

The product's identification label (Fig. 2) is located on the rear of the toilet seat raiser
Manufacturer's logo
Manufacturer information
Date of manufacture
Model name
Catalogue number
Medical product in compliance with
EU Regulation 2017/745
CE mark
Read the User manual!
Maximum payload
Unique Device Identification (UDI)
Serial number
16
4.

Assembling the toilet seat raiser

Fig. 1
IMPORTANT!
Remove by following the instructions in reverse order.
Fig. 2
Bischoff & Bischoff GmbH | 30.09.2020 - Revision: 1
TSE-Easy 10
Toilet seat raiser |
17