Husqvarna WR 250 2011 Manual De Uso Y Mantenimiento página 105

WARNING!
Brake fluid quickly ruins painted surfaces;
any spilled fluid should be completely wiped
up immediately.
* Brake fluid may cause irritation. Avoid
contact with skin or eyes. In case of contact,
flush thoroughly and call a doctor if your
eyes were exposed.
Periodically check the connecting hoses (see
"Periodical maintenance card"): if the hoses
(A) and (B) are worned or cracked, their re-
placement is advised.
A
EN - 46
B
FRONT BRAKING SYSTEM BLEEDING
The braking system must be bled after the fluid replacement
or when, due to air in the circuit, the lever stroke is long and
spongy.
Proceed as follows:
- Remove the rubber cap on the bleeding valve (1).
- Attach a clear plastic hose to the bleeding valve on the brake
caliper and turn the other end of the hose into a container
(make sure that the end of the hose is submerged in brake
fluid during the entire bleeding operation).
1