Throttle Control; Steering Lock - Husqvarna WR 250 2011 Manual De Uso Y Mantenimiento

THROTTLE CONTROL

The throttle knob (1), is located on the right hand side of the
handlebar. The position of the throttle control can be adjusted
by loosening the two fastenig screws .
CAUTION
Do not forget to tighten the screws (A) after
the adjustment.
FRONT BRAKE CONTROL
The brake control lever (2) is located on the right hand side of
the handlebar. The position of the throttle control can be ad-
justed by loosening the two fastenig screws .
CAUTION
Do not forget to tighten the screws (B) after
the adjustment.

STEERING LOCK

The motorcycle is equipped with a steering lock (1) on the R.H.
side of the steering head tube.
To lock it, procede as follows: turn the handlebar leftwards,
place the key in lock and turn counterclockwise. Push the key
inwards (if necessary, turn to and from). Turn the key clockwise
and remove it from the lock.
To unlock the steering lock, reverse the above procedure.
1
EN - 13