AERMEC prd 1 Manual De Uso página 6

Thank you for your choice. We trust you will be sati-
sfi ed with your purchase.
The remote terminal PRD1, is an electronic device
that allows the remote control of an air-conditioning
unit managed by the µC2. The functions allowed are
the same as those available on the display and the
local keypad of the µC2. The packaging contains the
remote terminal, "RJ12 power supply" and telephone
cable.
Set
Prg
Panel installation
This version has been designed for panel installation,
with the drilling template measuring 127 x 69 mm
with 2 circular holes, diameter 4 mm. For installation
proceed as follows:
• connect the telephone cable;
• insert the terminal, without the front frame, in the
opening, and use the countersunk screws to fasten the
device to the panel;
• fi nally, apply the click-on frame.
156.2
125.42
Set
Prg
Sel
d
Wall-mounting
The version of the terminal for wall-mounting requires
the rear of the case A to be fastened using a standard
3-module switch box.
• fasten the rear of the case to the box using the round-
head screws;
• connect the telephone cable;
• rest the front panel on the rear of the case and fasten
the assembly using the countersunk screws;
• fi nally, apply the click-on frame.
Sel
30.2
17.8