Instructions For Use Ib 40 Compact; Positioning - Euroflex monster IB 40 COMPACT Manual De Instrucciones

INSTRUCTIONS FOR USE IB 40 COMPACT

POSITIONING

When setting up the ironing board please note the following:
- Place the ironing board on a flat, even, dry surface, near an earthed mains socket.
- Position the ironing board securely so that nobody can knock it over or get hurt.
- Never put the appliance on or near warm surfaces or near flames.
- Use the appliance in dry rooms only.
- To avoid scalding, keep the appliance away from children.
- Use only the correct extension cables in accordance with the advice given on page 18;
pay attention not to trip over the cord.
Put up the ironing board as follows:
- Place the ironing board upright on the floor (steam generator downward).
- Hold the end of the ironing board with one hand.
- With the other hand hold the upper part of the ironing board legs.
- Firmly pull the ironing board wide apart (1.) until the adjustment height device locks in
place (2.).
- Place the ironing board in a horizontal position (3.).
1 1
Note: Be careful that the feet of the ironing board don't slip on the smooth floor while opening/
closing the ironing board.
To assemble the iron rest pad proceed as follows:
- remove the metal frame from the rear of the board
- clip the rest pad onto the metal frame following the guides on the reverse of the rest pad
- press hard to ensure that the metal frame is firmly fixed on the pad guides.
Downloaded from www.vandenborre.be
3
2
21