Suction Function And Heating Of Integrated Board - Euroflex monster IB 40 COMPACT Manual De Instrucciones

INSTRUCTIONS FOR USE IB 40 COMPACT
Dry ironing
It is advisable to start ironing the articles that require the lowest temperature.
Getting the appliance ready:
- Put the iron on the iron-rest mat
- set the steam control to the required position, for instance:
• = synthetic fibres (minimum temperature)
•• = silk/wool (medium temperature)
••• = cotton/linen (maximum temperature)
- Insert the plug into the mains socket
- Turn the appliance on (power button) (the iron orange indicator light lights up and stays on).
Simultaneously, the orange warming-up indicator light on the iron lights up. The latter comes
off as soon as the soleplate reaches the required temperature. The iron reaches the required
temperature after 3-5 minutes.
- To dry iron DO NOT press the steam button.
After dry ironing
- Turn off the appliance (on/off switch) (the iron orange indicator light comes off)
- Pull the plug out of the mains socket. Let the appliance cool down completely.

SUCTION FUNCTION AND HEATING OF INTEGRATED BOARD

The suction absorbs the superfluous steam, which is no longer used after the ironing
process. The suction helps hold the garment on the ironing surface and helps to
dry the garment. Clean ,dry clothes are obtained, ready to be placed straight
in the wardrobe without further airing. The heated ironing surface stays dry, and
keeps the steam hot so that it passes through the cover and board to be expelled
without condensing.
Recommendation:
- Through the suction function, light fabrics (silk etc.) can be held in place on
the ironing board, preventing them from slipping.
- The suction function cools the fabric and "fixes" the results of the ironing,
guaranteeing for ex. perfect folds
IB 40 COMPACT Suctioning (RA)
This model has no blowing function
- For the suction function set the selector switch
on position "I" and the suction function works
every time the iron's steam button is pressed
- When the switch is in position "II" the
suction will be continuous.
- With the switch in position "0" the suction func-
tion is switched off.
Downloaded from www.vandenborre.be
26
Selector
switch