Tecnotest SL31205 Manual Operativo página 37

______________________________________________________________________ OSCILLOSCOPE KIT
Dear garage owner,
Thank you for having chosen one of our instruments for your workshop. We are
certain that it will give the utmost satisfaction and be a notable help on the job.
Please become fully familiar with the instructions in this user's manual. It should
be kept ready to hand for consultation whenever required.
This manual contains some use instructions relating to the functioning of the
programme SCOPE / MULTIMETER with the Stargas.
The oscilloscope has three operating modes:
•
LAB SCOPE / TYPICAL CURVES.
•
PRIMARY.
•
SECONDARY (present only on SL31205/PLUS).
The LAB SCOPE / TYPICAL CURVES mode enables the user to carry out low voltage
signal measurements.
The PRIMARY mode enables the user to examine the ignition coil primary signals.
The SECONDARY mode enables the user to examine the ignition coil secondary signals
(present only on SL31205/PLUS).
It is also possible to use an ammeter, an ohmmeter (present only on SL31205/PLUS) or
a voltmeter as a function of the tests that are to be carried out.
OPERATING INSTRUCTIONS

33