Initial Use/Charging Process - Beurer cellulite releaZer Instrucciones De Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 58
Function light status
Function lights flash in a circle
Function lights illuminate continuously
The left and right function lights flash
alternately

6. Initial use/charging process

Note
Before using the cellulite releaZer for the first time, let it charge for a minimum
of 3.5 hours. Proceed as follows:
• Connect the charging cable to the mains adapter and the cellulite releaZer
(Figure 1). Then insert the mains adapter into a suitable socket. Alternatively,
you can also charge the cellulite releaZer with the charging cable via the
USB port on your computer or laptop (Figure 2).
When the device is charging, the function lights flash in a circle. When the
cellulite releaZer is fully charged, the function lights illuminate continuously.
If the left and right function lights flash alternately during operation, you have
to charge the cellulite releaZer.
charging function
(charging cable plugged in)
Charging
Charging complete
Low battery
29

Publicidad

Tabla de contenido
loading

Tabla de contenido