Package Contents; Important Information On The Device; Description Of Device And Accessories; Initial Use - Beurer IL 50 Manual De Instrucciones

Cleaning and Storage:
• Never immerse the unit in water or any other liq-
uid. Never hold the complete device under running
water to clean it. Otherwise liquid can enter it and
cause damage.
• Ensure that no water penetrates inside the unit!
• Before cleaning the unit, switch it off, unplug it and
allow it to cool down completely before you touch
it or pack it away.
• Do not put the device or accessories in a
dishwasher, washing machine or tumble dryer.
• Do not use any aggressive solvents, cleaning
agents, detergents or any other strong chemicals
to clean the device.
• Store the device and accessories in a location pro-
tected against environmental influences, i.e. in a
safe and dry location. Do not expose the device
and accessories to direct sunlight, extreme hot or
cold temperatures or humidity (e.g. in the bath-
room).
• Dispose of the device, components and optional
accessories according to applicable local regula-
tions. Unlawful disposal may cause environmen-
tal pollution.

2. Package contents

For details of the delivery scope, see description of the
device and accessories on page 5.
• Infrared heat lamp
• These instructions for use
• Eye-protection cover
3. Important information on the
device
Electrical safety
The unit is protected against overheating by an au-
tomatic thermal cut-off Protective insulation.
Proper use
The unit is intended for directing infrared radiation at
the human body.
Any other use is regarded as improper. This unit is
not designed for commercial use, but for use in the
private home!
4. Description of device and
accessories
1 Swivelling body with handles
2 Disc
3 On/Off switch
4 Remaining time display
5 Time selector
6 Foot with integrated cable channel for coiling the
power cable.

5. Initial use

• Place the unit on a solid and even surface. The unit
must not be set up on a slope or laying down.
• The minimum distance
between flammable items
and the infrared lamp must
not be less than 40 inches
(1 m).

6. Operation

Unpacking and setup
• The timer switches off automatically at the end of
the set time.
• The swiveling body allows you to adjust the infra-
red heat lamp to suit your needs.
• Insert the plug into a wall outlet.
• Switch on the unit at the On/Off switch (3). The
remaining time display (4) shows 15 minutes.
• Set the desired treatment time (1 to 15 minutes)
by pressing the time selector (5) several times.
• The set time will appear on the display (4).
5
1
2
3
4
5
6
min.
40 inches