Product Description And Specifications; Intended Use; Product Features; Declaration Of Conformity - Bosch GAS 35 M AFC Professional Manual Original

OBJ_BUCH-1715-004.book Page 18 Monday, December 12, 2016 1:45 PM
18 | English
Symbols and their meaning
AFC Automatic filter cleaning
(AFC = Automatic Filter Cleaning)
Attach only one L-Boxx (max.).
The weight of the L-Boxx with contents
must not exceed 15 kg.
 Do not hang the vacuum cleaner, e. g.
for transport purposes, to a crane
hook. The vacuum cleaner is not suitable
for handling by crane. Danger of injury
and causing damage.
 Do not use the vacuum cleaner as a
seat, ladder or stepladder. The vacuum
cleaner can tip over and become dam-
aged. Danger of injury.
Product Description and Specifica-
tions
While reading the operating instructions, unfold the graphics
page for the vacuum cleaner and leave it open.

Intended Use

The machine is intended for collection, vacuuming, conveying
and separation of wood chips, as well as non-flammable dry
dusts, non-flammable liquids and water-air mixtures. The vac-
uum cleaner is dust-technically checked and corresponds
with dust category M. It is suitable for the increased demands
of industrial usage, as required in trades, industry and work-
shops.
According to IEC/EN 60335-2-69, vacuum cleaners of dust
category M may only be used for vacuuming and extraction of
hazardous materials with an exposition limit value
3
≥ 0.1 mg/m .
Use the vacuum cleaner only when you fully understand and
can perform all functions without limitation, or have received
appropriate instructions.
1 609 92A 2N3 | (12.12.16)

Product Features

The numbering of the product features refers to the illustra-
tion of the vacuum cleaner on the graphics page.
1 Container
2 Plug cap for the vacuum hose connection
3 Hose connection piece
4 Vacuum-hose holder
5 Socket for power tool
6 Airflow regulator
7 Mode selector switch
8 Control knob for vacuum capacity
(not for article number 3 601 JC3 170)
9 AFC button
10 Carrying handle
11 L-Boxx retainer
12 Vacuum lid
13 Latch of the vacuum cover
14 Rear wheel
15 Castor brake
16 Castor
17 Cable holder
18 Locking latch of filter cover
19 Holder for vacuum tubes
20 Holder for crevice nozzle/elbow
21 Holder for floor nozzle
22 Tool sleeve
23 Elbow
24 Vacuum hose
25 Disposal bag
26 Flat-fold filter(PES)
27 Crevice nozzle
28 Rubber lip
29 Brush insert
30 Floor nozzle
31 Vacuum tube
32 Retainer for vacuum-hose holder
33 Snap-fastener
34 Air diffuser
35 Signalling LED
36 Filter cover
37 Level sensors
Accessories shown or described are not part of the standard deliv-
ery scope of the product. A complete overview of accessories can
be found in our accessories program.

Declaration of Conformity

We declare under our sole responsibility that the product de-
scribed under "Technical Data" is in conformity with all rele-
vant provisions of the directives 2011/65/EU, 2014/30/EU,
2006/42/EC including their amendments and complies with
the following standards: EN 60335-1, EN 60335-2-69,
EN 50581.
Bosch Power Tools