Manual Handling; On Manual Handling; Auto Mode; Adapted Auto Mode - Boneco H400 Instrucciones De Uso

32

MANUAL HANDLING

en

ON MANUAL HANDLING

Manual handling works conveniently by the knob on the
front side. The BONECO app offers additional, extensive
options for control and automation of the BONECO ap-
pliance.

AUTO MODE

If you have never operated the BONECO appliance with
the BONECO app and switch it on for the first time, it
starts up in AUTO mode. The appliance is preset to a
target relative humidity of 50 percent. The performance
level is automatically adapted to the current humidity: The
drier the air, the higher the performance level.
If the preset target humidity is exceeded, the appliance
switches to standby mode, which is indicated by the puls-
ing LED.
If the humidity drops below the set level, the BONECO
appliance resumes operation.

ADAPTED AUTO MODE

If you have already operated the BONECO appliance with
the BONECO app and set a different humidity, that value is
automatically taken over when the appliance is switched
on.

SWITCHING ON AND OFF

1. Briefly press the knob once to switch on the BONECO
appliance.
The appliance is always in AUTO mode when it is switched
on. You can identify active AUTO mode by the small LED
that lights up above the knob.
2. To switch off the BONECO appliance while it is in
AUTO mode, briefly press the knob once.