Manual Operation; About Manual Operation; Auto Mode; Adapted Auto Mode - Boneco W400 Manual De Instrucciones

32

MANUAL OPERATION

en

ABOUT MANUAL OPERATION

Manual operation works conveniently by the knob on the
front side. The BONECO app offers additional, extensive
options for control and automation of the BONECO W400.

AUTO MODE

If you have never operated the BONECO W400 with the
BONECO app and switch it on for the first time, it starts
up in AUTO mode. The appliance is preset to a target
humidity of 50 percent. The performance level is auto-
matically adapted to the current humidity: The drier the
air, the higher the performance level.
If the preset target humidity is exceeded, the appliance
switches to standby mode, which is indicated by the puls-
ing LED.
If the humidity drops below the set level, the BONECO
W400 resumes operation.

ADAPTED AUTO MODE

If you have already operated the BONECO W400 with the
BONECO app and set a different humidity, that value is
automatically taken over when it is switched on.

SWITCHING ON AND OFF

1. Briefly press the knob once to switch on the BONECO
W400.
The appliance is always in AUTO mode when it is switched
on. You can identify active AUTO mode by the small LED
that lights up above the knob.
2. To switch off the BONECO W400 while it is in AUTO
mode, briefly press the knob once.