Using The Audio/Video Input Jacks; Connecting A Vcr Or Dvd Player; Using The Audio Output Jacks; Connecting To A Stereo Amplifier - Sanyo DS32830H Manual Del Propietário

USING THE AUDIO/VIDEO INPUT JACKS

QuickTips
Make sure all cable
connectors are fully
seated on jacks.
Always match AV cables
according to the colors;
for right audio,
RED WHITE
for left audio and
YELLOW
for video.
A solid Blue screen with
the word VIDEO1 or
VIDEO2, displayed
means that the Video
mode is selected, but
no signal is being
detected at the
Video jacks. Check
connections, turn on
external equipment.
Position your TV at
least 2 feet from stereo
speakers. The magnets
in the speakers may
affect the picture
quality.
Need help?
Visit our Web site at
www.sanyoctv.com
or Call 1-800-877-5032

USING THE AUDIO OUTPUT JACKS

CONNECTING AUDIO OUT JACKS TO A STEREO AMPLIFIER
Switch off TV and external equipment before connecting cables. (Cables are not supplied.)
Connect the TV Audio Out (R/L) to the Stereo Amplifier In (R/L).
Press POWER to turn on the TV. Turn on external equipment also.
Use the AUDIO OUTPUT on-screen menu options to select Fixed or Variable output signal.
Notes:– DO NOT connect external speakers directly to the TV.
– When TV Speakers is in the ON mode, sound will
be reproduced through your TV and stereo amplifier.
– When TV Speakers is in the OFF mode, sound
will be reproduced only through the stereo amplifier.
(See page 14 to set TV speakers.)
6

CONNECTING A VCR OR DVD PLAYER

Switch off TV and external equipment before connecting cables. (Cables are not supplied.)
Connect VCR, DVD Player, or other equipment's Audio Video Out to the TV Audio Video
Input.
For Mono VCR (Single Audio Jack) connect VCR Audio Out to TV Audio (L) Input.
Optional
Connect DVD Player or other equipment's S-Video Out to the TV S-Video In Jack.
Using the S-Video jack overrides the Video jack.
Press POWER to turn on the TV. Turn on external equipment also.
Press the INPUT key to select VIDEO1 or VIDEO2.
Back View of VCR
A/V JACKS
IN
VIDEO L- AUDIO -R
OUT
VIDEO L- AUDIO -R
TV A V Input
Jacks
VIDEO AUDIO INPUT
COMPONENT
S-VIDEO
DVD Player
OUTPUT
VIDEO OUT
AV2 AV1
VIDEO
(MONO)
L L
R AUDIO R
Stereo Amplifier
What you will need for
connections:
AV Cable – 1
S-VIDEO OUT
O
PTIONAL
L R
S-Video Cable – 1
AUDIO OUT
Audio Cable – 1
Remote Control
Press
INPUT key after
connecting cables.
What you will need for
connections:
Audio Cable – 1
AUDIO
OUTPUT
L
R
C
ONNECTION
VCR TV CABLE
DVD SAT AUX
POWER
INPUT RESET
VIDEO AUDIO INPUT
AV2 AV1
COMPONENT
S-VIDEO
VIDEO
Y
(MONO)
P (MONO)
b L L L
R R AUDIO R
P
r
Back of TV