SynchronIzIng WIth itunes
NOTE: Before attempting to synchronize your iPod/iPhone with iTunes, be sure
both your iPod/iPhone and iTunes are updated to the latest software version.
Before attempting to synchronize, be sure the JBL On Stage IV's USB port is
connected to the computer on which your iTunes is located.
1.
Place your
iPod/iPhone on the JBL On Stage IV's docking connector. Make
sure the iPod/iPhone is inserted all the way onto the connector.
2.
Use your computer's iTunes software to synchronize the
iTunes.
3.
When you're finished synchronizing, eject the
ipod/iphone chargIng
The JBL On Stage IV will charge a docked iPod/iPhone under these conditions:
•
When the
JBL On Stage IV is being powered by its AC power adapter
•
When the
JBL On Stage IV is connected to a computer via a USB cable
The JBL On Stage IV will not charge a docked iPod/iPhone while under battery
power unless it is also connected to a computer via a USB cable.
0217CSK - JBL On Stage IV OM R2.indb 9
operatIng your JBl on Stage IV on
Battery poWer
If you have inserted batteries as explained in the JBL On Stage IV Easy Setup Guide
– Step 3, on page 3, you can unplug the JBL On Stage IV's power adapter and the
unit will operate on battery power.
While running on battery power, the JBL On Stage IV will automatically enter
the Standby mode after the system detects no audio signal for 5 minutes. Upon
detecting an audio signal the system will return to normal operation and the LED
will light up.
iPod/iPhone with
When running on AC power, the JBL On Stage IV will automatically enter the
standby mode after the system detects no audio signal for 10 minutes. As above,
iPod/iPhone from iTunes.
it will return to normal operation upon detecting an audio signal, and the LED will
light up.
Notes on battery power operation:
•
•
The
JBL On Stage IV will not charge rechargeable batteries.
The
JBL On Stage IV will not charge a docked iPod/iPhone while under
battery power unless it is also connected to a computer via a USB cable.
www.jbl.com
9
20/07/10 14:46:01