To Set Up; Charging The Battery - Beurer ReleaZer Manual De Instrucciones

Function light status
Function lights flash in a circle
Function lights illuminate continuously
The left and right function lights flash
alternately.

5. To Set Up

Charging the Battery

NOTE: Before using the Cellulite ReleaZer for the first time, let it charge for
at least 3½ hours.
Connect the micro USB charging cable to the power adapter and to the
Cellulite ReleaZer (see figure 1). Insert the power adapter into an electrical
outlet. You can also charge the Cellulite ReleaZer via the USB port on your
computer (see figure 2).
While the device is charging, the function light will illuminate in a circular
pattern. When the Cellulite ReleaZer is fully charged, the function light will
illuminate steadily. Charge the Cellulite ReleaZer again when the two sides
of the function light flash alternately.
Charging function
(charging cable plugged in)
Charging
Charging complete
Low battery
10