Unold 18580 Instrucciones De Uso página 19

Ocultar thumbs Ver también para 18580:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 46
4.
Press the "Unold" opening button in the centre of the lid. The lid is unlocked
and opens automatically.
5.
Fill the kettle with the desired quantity of clean, cold water. At least
0.25 litres of water must be filled, the maximum fill quantity is 1.2 litres
of water.
6.
Caution: If the kettle is overfilled, boiling water can splash out and cause
burn injuries!
7.
Close the lid by pressing lightly.
8.
Place the kettle so it is straight on the base, to ensure that contact is estab-
lished with the base.
9.
Check to make sure that the appliance is stable.
10. Caution: If the kettle is not correctly seated the appliance cannot be
switched on.
11. Press the "
cate that the boiling process has started. The indicator light in the interior
of the appliance will be illuminated.
12. During the boiling process it is possible to select a different temperature.
13. If you desire a different temperature select it via the arrow keys. You can
select 60°C, 70°C, 80°C, 90°C and 100°C.
14. When the water has reached the desired temperature, the automatic control
shuts off the appliance.
15. Naturally you can also press the "
process earlier. In this process the currently set temperature will saved for
the next boiling process until the base is disconnected from the mains sup-
ply.
16. Please ensure that you always switch off the appliance via the "
before you take it off of the base.
17. Caution: The automatic temperature control only functions when the lid is
properly closed.
18. If you want to heat up water again, let the appliance cool for several minutes.
Boiling water can cause scalding. Therefore, please handle the appliance
with care when it contains hot water.
19. The appliance features boil dry protection. When operated without water or
with excessive scaling, the appliance shuts off automatically. If this hap-
pens, please allow the appliance to cool off briefly before filling it with water
again or descale the appliance as described in the chapter "Descaling".
" button The temperature display 100°C will light up to indi-
Copyright UNOLD AG | www.unold.de
" button again if you want to end the
" button,
19

Publicidad

Tabla de contenido
loading

Tabla de contenido