Symbols Used; Intended Use; Declaration Of Conformity; Limitation Of Liability - Beem Schneid-FiXX Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Schneid-FiXX

Symbols used

DANGER
This indicates an imminent hazardous
situation, which could lead to severe
physical injury or death.
Follow these instructions to avoid
danger.
WARNING
This indicates a possible hazardous situ-
ation, which could lead to severe physical
injury or death.
Follow these instructions to avoid
danger.
CAUTION
This indicates a potentially hazardous
situation, which could lead to minor inju-
ries or material damage.
Follow these instructions to avoid
danger.
NOTE
A note contains additional information
to simplify the use of the appliance.

Intended use

This appliance is intended primarily for non-
commercial use in closed rooms for chop-
ping food in normal household quantities.
Any use other than previously stated is con-
sidered as improper use.
15
WARNING
If not used for its intended purpose and/or
used in any other way, the appliance may
be or become a source of danger.
Use the appliance only for its intended
purpose.
Observe the procedures described in
this user manual.
No claims of any kind will be accepted for
damage resulting from use of the appliance
for other than its intended purpose.
The risk must be borne solely by the user.

Declaration of Conformity

BEEM hereby declares that this appliance
complies with the fundamental require-
ments and other relevant provisions of
2006/95/EC and 2004/108/EC and und
2009/125/EC directives.

Limitation of liability

We assume no liability for damage or
follow-up damage in the case of:
failure to observe the instructions in the
user manual,
use for other than the intended purpose,
improper or unsuitable handling,
incorrectly performed repairs,
unauthorised modifications,
use of non-approved parts or spare
parts,
use of unsuitable supplementary or ac-
cessory parts.
BEEM - Elements of Lifestyle
EN

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

M14.001

Tabla de contenido