Electrical Connection; Startup; Checking The Delivery Contents - Beem Schneid-FiXX Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

EN

Electrical connection

For safe and trouble-free operation of the
appliance, the following instructions on the
electrical connection must be be observed:
Before connecting the appliance, com-
pare the connection data (voltage and
frequency) on the rating plate with those
of your mains power supply. The data
must correspond in order to avoid dam-
age to the appliance. If in doubt, ask
your electrical appliance retailer.
The mains socket must be protected by
at least a 10 A automatic circuit breaker.
Ensure that the mains cable is undam-
aged and is not laid over hot surfaces or
sharp edges.
The connecting cable must not be
strained or bent.
Always unwind the mains cable com-
pletely before connecting the appliance
to the mains socket.
The electrical safety of the appliance
is only assured when it is connected
to a properly installed protective earth
(PE) conductor system. Connection to
a mains socket without PE conductor
is forbidden. If in doubt, the electrical
system must be checked by a qualified
electrician. The manufacturer assumes
no liability for injury or damage caused
by a missing or interrupted protective
earth conductor.
BEEM - Elements of Lifestyle

Startup

Unpacking
Remove the appliance, all accessory
parts and the user manual from the
box.
Remove all packaging materials and
protective foils from the product and
the accessories before using it for the
first time.
NOTE
Do not remove the rating plate or any
warning signs on the appliance.
If possible, keep the original packag-
ing during the warranty and guarantee
period in order to be able to pack the
appliance properly in the event of
a guarantee claim. Transport dam-
age will invalidate the warranty and
guarantee.

Checking the delivery contents

Check for visible signs of damage or miss-
ing items.
Report incomplete or damaged contents to
your supplier immediately.
Prior to first use
Clean the appliance and the accessories as
described in the Cleaning and care sec-
tion.
Schneid-FiXX
18

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

M14.001

Tabla de contenido