Removing The Drip Tray; Removing The Grounds Tray - Expobar Brilliance Manual De Usuario

After the cleaning, proceed to dry the mechanism up. Invert it and shake it as to force water out as
maximum as possible. Dry up all the surfaces, and pay special attention to dry up the superior cone
of the group, as this is the one receiving the grinded coffee. Case this one was humid, this would
cause the cone to clog with coffee powder.
Once finished the cleaning, close the cleaning vane and re-tighten the aforementioned screw that
keeps it close, and proceed to reinstall the group on the machine.
Once completed this cleaning, and after re-installing the espresso group back in place, we
recommend to perform an auto-cleaning cycle (see the chapter in this manual).
16.7 Removing the
drip tray
To remove the drip tray,
wide open the door, and
then move the drip tray
up around 10mm and
then remove it normally.

16.8 Removing the grounds tray

First remove the driptray as already explained. Now, to
remove the grounds tray, displace upwards the spout holder,
as to allow the maximum free space to remove the grounds
container. And simply, slide out the grounds container.
51
• Hygiene and maintenance
English