Toto TBP01301 Manual De Operaciones página 4

EN
WARNING
Periodically (more than twice a year) check around the
piping for water leakage and loose connections.
Parts may get damaged from deterioration and wear and may cause
leakage resulting in water damage to property or cause injuries such
as scalding.
Set the cold water supply pressure higher than or equal to
the hot water supply pressure.
Mandatory
In order to prevent scalding due to unsafe operation, the cold water
supply pressure must be set higher than or equal to the hot water
supply pressure. If increasing pressure on the hot water side, make
sure the hot water supply pressure side is set lower than the cold
water side.
CAUTION
Do not subject the product to strong force or impact.
Strong forces or impacts may damage the product and cause leakage
resulting in water damage to property.
Do not ignore abnormally loose parts.
If abnormally loose parts are ignored, parts may break or plated
surfaces may crack and cause personal injury. If you detect any
damaged parts or cracked plated surfaces, immediately call for repair
or replacement.
Do not strike or use the plated parts with undue force.
Prohibition
The plated surface may crack and injure you. If the plated surface
cracks, immediately ask for repair.
Do not use cleaning agents other than neutral detergent.
(Refer to page 30.)
If you use cleaning agents other than neutral detergent, they may
discolor or damage the faucet.
3