Toto TBP01301 Manual De Operaciones página 51

Llenador de bañera independiente (para cuerpo principal)
Ocultar thumbs Ver también para TBP01301:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 14
Phenomena
Only cold water
comes out.
Temperature
cannot be
adjusted well.
The water flow is
turbulent.
Water leaks from
the connection
between the
shower hose and
the main body.
The shower head
turns naturally.
z The following phenomena may occur but they are not due to any problem.
Phenomena
Handle operation
requires more effort than
when the product was
new.
Water flow sounds loud.
Before asking for repair
Inspection Point
Does a sufficient amount of hot
water come from the hot-water
supply?
Does a sufficient amount of
hot water come from the hot-
water supply?
Is the spout opening or filter
clogged?
Is the shower head clogged?
Is the spout opening or the
filter clogged?
Is the connection between the
shower hose and the main
body loosened?
Is the shower hose kinked?
This is due to the fact that the parts inside the product
fit each other well and become stable during use. This
is not due to any problem.
Loud sound results from high water pressure and
large flow rate.
The sound can be decreased by reducing the flow rate.
Check the water
heating temperature
and the operation of
the water heater.
Check the water
heating temperature
and the operation of
the water heater.
Clean the spout
opening and filter.
Clean the spray face.
Clean the spout
opening and filter.
Retighten the shower
hose.
Remove the kink in
the shower hose.
Explanation
50
Solution
Ref.
Page
-
-
Page 30
Page 30
-
-

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Tbp02303

Tabla de contenido