Machine Description; Machine Operating Cycle; Controls Description; Specifications - Bezzera ELLISSE PM Manual De Instrucciones

ELLISSE
MOD.

3 - MACHINE DESCRIPTION

3.1 Machine Operating Cycle

The water coming from the water supply by a motor pump with a pressure ranging from 9 to 10 bar,
passes through an over pressure valve set to 12 bar. The boiler water heated by a resistance, heats in
its turn the water in the exchanger water, which by means of a suction lift allows a constant tempera-
ture. From the external exchanger, the water goes directly into the group which, by an electric valve
controlled electrically by a push-button panel or by a key, allows the water to get in for the coffee
infusion.

3.2 Controls Description

1 Machine Start up Switch
2 Left Steam Nozzle
3 Left Steam Knob
4 Filter Holder
5 Button (mod. PM) or push-buttons panel (mod. TE and DE) for water/coffee distribution
6 Hot Water Supply
7 Right Steam Knob
7a Hot water knob (ELLISSE PM)
8 Right Steam Knob
9 Gauge
10 Programming key (by request ELLISSE DE - TE)
3.3 Specifications
The espresso machine ELLISSE is produced in different versions from 1 to 4 groups. Starting from
2-group version, resistances with power above 3000 W (except the versions feeded by 110-120 V
50-60 Hz) can be supplied, on request. This handbook describes the 2-group version; however use
instructions and control panel apply to the other versions too.
Power Supply
Resistance
Resistance
Power Supply
Resistance
Resistance
Boiler
Width "A"
Depth "B"
Height "C"
Net Weight
Gross Weight (pallets)
Water supply connector
Drain connector
(Fig. 01)
(Fig. 02)
1 GROUP
V
V
W 1400
V
V
W 2000
l 5
mm 570
mm 500
mm 510
kg 50
kg 60
2 GROUPS 3 GROUPS
110 - 120 / 50-60Hz
110
2600
220 - 230 - 240 - 380 - 400 / 50-60 Hz
230
3000
11
750
500
510
70
83
G 3/8"
G 3/4"
22
4 GROUPS
3000 3000
5000 5000
17 24
960 1170
500 500
510 510
83 100
97 118